|
Product Details:
|
| Connection: | SD Card, Build-in WiFi | RCD: | 30mA Type A+6mA DC |
|---|---|---|---|
| OCPP: | OCPP 1.6 Json (OCPP 2.0 Optional) | Design Style: | New China-Chic |
| Cable Length:: | 3.5m/customized | Standard: | IEC 61851-1 |
| High Light: | 400V 16 amp EV charger,11kw ev charger IEC 61851-1,11kw 3 phase ev charger |
||
11kw 16Amp Car Charge Station SD Card WiFi 400v Type2 Plug RFID Card IP65 Radio Tuner
OTHER FUNCTIONS
1. o-pen protection
2. rcd: ac30ma+dc6ma
3. ingress protection
4. over current protection
5. ground protection
6. over/under voltage protection
7. over temperature protection
All products must pass the following inspection before leaving the factory
1. Function test:
A.charging function control test,
B.communication function test,
C.insulation detection function test,
D.vehicle plug locking function test,
E.pre-charging function test
2. Charging output test:
A.four ui large constant power output test,
B.power control test,
C.low-voltage auxiliary power test,
D.output current response time test,
E.transmission out current stopping rate test,
F.efficiency test,
G.power factor test.
3. control guide test:
A.charging control state test,
B.charging connection control timing test,
C.control guide voltage limit test,
D.communication interruption test,
E.protection grounding continuity loss test,
F.connection detection signal disconnection test,
G.battery voltage and communication message match test,
H.battery voltage exceeds the charger range test,
I.draw battery two protection function vehicle zu high allowable total voltage mismatch test,
J.charging demand is greater than Battery parameters test.
Contact Person: admin
Tel: +8619136355221
