|
Product Details:
|
| Application: | Home EV Charging Pile | Output Power: | 7Kw/11KW/22KW |
|---|---|---|---|
| Charging Standards: | Type 1&type 2&Tesla | Protection: | OCP OVP OTP SCP |
| OCPP: | OCPP 1.6 Json (OCPP 2.0 Optional) | Waterproof: | IP66 |
| High Light: | wallbox fast charger OCPP 1.6 Json,wallbox 7kw type 2 IP66,durable 32a type 2 charger |
||
product details
| Data | Model | GS7-AC-BO1 | GS11-AC-BO1 | GS22-AC-BO1 |
|
Input |
Power Supply | 1P+N+PE | 3P+N+PE | 3P+N+PE |
| Rated Voltage | 230V AC | 400V AC | 400V AC | |
| Rated Current | 32A | 16A | 32A | |
|
Output |
Output Voltage | 230V AC | 400V AC | 400V AC |
| Output Current | 32A | 16A | 32A | |
| Rated Power | 7KW | 11KW | 22KW | |
|
User Interface |
Charging Port | Type 2 | ||
| Cable Length | 3.5M/4M/5M/10M | |||
| LED Indicator | Yellow/Green/Red | |||
| Start Mode | Plug&Play / RFID Card / APP | |||
| Emergency Stop | YES | |||
|
Communication |
WIFI | Optional | ||
| 3G/4G/5G | Optional | |||
| OCPP | OCPP 1.6 Json (OCPP 2.0 Optional) | |||
|
Package |
Unit Size | 340*285*147mm | ||
| Package Size | 480*350*210mm | 480*350*210mm | 480*350*210mm | |
| Net Weight | 3.8KGS | 4.5KGS | 4.5KGS | |
| Gross Weight | 4KGS | 5KGS | 5KGS | |
PEN Fault Detection
-An additional CT is installed in the PE conductor to detect any fault current-If the fault current reaches a predetermined
threshold, all conductors are switched off.
-The load and henceforth dangerous PE are become isolated from the supply.
Packing & Delivery
|
Model Number
|
HSJ-GS-B7
|
HSJ-GS-B11
|
HSJ-GS-B22
|
|
|
1 Unit Per Box
|
||
|
Carton Box size: 48*35*21cm
|
|||
|
N.W/G.W: 6.5KGS/7.5KGS
|
|||
|
Accessries
|
EV Charging Plug,Dummy socket Holder,Manual
|
||
|
Shipping Way
|
UPS/FEDEX/DHL
|
By Air
|
By Sea / CR Express
|
|
Shipping Time
|
3-7 Days
|
5-10 days
|
5-60 days
|
|
Sample order
|
Fast Shipping high cost
|
Fast Shipping high cost
|
|
|
Mass Order
|
|
Fast Shipping high cost
|
Cheap Shipping Low cost
|
*This product is a 22KW 3-phase AC charging pile, mainly used for AC charging of electric vehicles. The product is composed of charging pile body, wall-hanging backboard, floor-to-ground column (optional), etc., with charging protection, charging by swiping card, charging by scanning code, mobile payment,networking monitoring and other functions.This product adopts industrial design principle, easy to install and easy to use.
*Exterior:Exquisite and light, a variety of color options, suitable for different application scenarios.
*Protection:level of protection IP54(waterproof and dustproof),can withstand wind,rain and sun exposure.
*Operation:The head of the charger is designed to open the cover with one bottom. The operation is simple and convenient, namely plug and play.
*Safety:multiple protection, safety upgrade, high quality materials, fireproof, waterproof and dustproof.
*Commonality:Small body, big energy, compatible with 99% of the new energy vehicles.
*Quality:Pure copper wire without oxidation,comply with inspection standard,flame retardant impact resistance.
*The performance of the charger meets the requirements<IEC 62196-2-2011 Plugs,socket-outlets,vehicle connectors and vehicle inlets-Conductive charging of electric vehicles Part 2>relevant regulation.
*According to <IEC 61851-1-2012 Electric Vehicle Conductive Charging System Part 1>relevant regulation, and with reference to the "Electric Vehicle Charging Facilities Typical Design" part of the function of the design.The products fully meets the national and industrial standards for electric vehicles.
Contact Person: admin
Tel: +8619136355221
